Advertisement
: Pyxis400 DISASS'Y SOP
Document No.
Take out Wireless LAN
Operation Name :
Glove Requirements: Half-finger gloves
White antenna
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-3000MS)
Bits Type: #0,Cross,φ=5mm,L=60mm
Tabulator：
Xin-Xin Chen
Standard Operation Procedure
Black antenna
Fig. 2
Screw
Fig. 3
Auditor ： Ethan Lai
Ver. :
Steps：
1. Tear off the acetate tape (Fig. 1).
2. First disconnect WLAN antennas, then
unscrew (Cross × 1) one screw to take out
WLAN card (Fig. 2, 3).
Torsion: 2.5 ± 0.5 kgf.cm
Take the screwdriver vertically to the screw
holes.
Qty.
Fixture list (Specification)
1
1
Issue Department：
Station :
1.00
2017/5/23
Date
:
Acetate tape
Fig. 1
NPSU-PPE
13(1/1)
Qty.
Advertisement
