: Pyxis400 DISASS'Y SOP
Document No.
Take out Panel
Operation Name :
Glove Requirements: Half-finger gloves
Front side
Back side
Bottom side
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Static air gun
Tabulator:
Xin-Xin Chen
Standard Operation Procedure
Fig. 1
Qty.
1
Auditor : Ethan Lai
Ver. :
Steps:
1. Take out Panel from Front Bezel (Fig. 3).
2. Inspect whether Front Bezel has obvious
defect in the four side, back side and bottom
side (Fig. 1, 2).
No obvious defect in the surface of Front
Bezel, then put it into the material box.
Fig. 2
Fixture list (Specification)
Issue Department:
Station :
1.00
2017/5/23
Date
:
CT
LVDS
LAB
cable
EL-2
NPSU-PPE
30(1/1)
图
一
Fig. 3
Qty.