: Pyxis400 DISASS'Y SOP
Document No.
Take out Speaker
Operation Name :
Glove Requirements: Half-finger gloves
Rubber ring
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator:
Xin-Xin Chen
Standard Operation Procedure
Hook
Fig. 1
Left side
Auditor : Ethan Lai
Steps:
1. Unscrew (Torx Pin-Head × 4) all joints of
Speaker (Fig. 2, 3).
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
2. Take out Speaker (Fig. 2, 3).
Don't lose the four rubber rings of Speaker.
No obvious defect in the surface.
First pull out the cable from the hook and
don't pull it using force (Fig. 1).
Fig. 2
Qty.
Fixture list (Specification)
1
1
Station :
1.00
Ver. :
Date
Right side
Issue Department:
21(1/2)
2017/5/23
:
Fig. 3
Qty.
NPSU-PPE