: Pyxis400 DISASS'Y SOP
Document No.
Take out FAN & disconnect LVDS cable
Operation Name :
Glove Requirements: Half-finger gloves
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator:
Xin-Xin Chen
Standard Operation Procedure
Qty.
1
1
Auditor : Ethan Lai
Ver. :
Steps:
1. Unscrew (× 3) all joints of FAN (Fig. 1).
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
2. Disconnect FAN cable and LVDS cable, then
take out FAN (Fig. 1).
Pull out FAN cable from the hook carefully.
Hook
Fixture list (Specification)
Issue Department:
Station :
1.00
2017/5/23
Date
:
Fig. 1
NPSU-PPE
12(1/1)
Qty.