Advertisement
: Pyxis400 DISASS'Y SOP
Document No.
Take out screws and cables
Operation Name :
Glove Requirements: Half-finger gloves
Take out screws
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator：
Xin-Xin Chen
Standard Operation Procedure
Qty.
1
1
Auditor ： Ethan Lai
Ver. :
Steps：
1. Follow the locations of cables from top to
bottom illustrated as Fig. 1 to take out
cables.
2. Unscrew the screws (Torx Pin-Head × 2)
illustrated as Fig. 1.
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
Follow the locations
of cables from top to
bottom to take out
cables
Fixture list (Specification)
Issue Department：
Station :
1.00
2017/5/23
Date
:
Fig. 1
NPSU-PPE
10(1/1)
Qty.
Advertisement
