Advertisement
: Pyxis400 DISASS'Y SOP
Document No.
Take out cushions & unscrew BOTTOM BAND
Operation Name :
Glove Requirements: Half-finger gloves
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator：
Xin-Xin Chen
Standard Operation Procedure
Fig. 1
Fig. 2
The bits can't
plastic part
Qty.
1
1
Auditor ： Ethan Lai
Ver. :
Steps：
1. Take out Cushion-R and Cushion-L (Fig. 1, 2).
Take out vertically.
2. Unscrew (Torx Pin-Head × 2) all joints of
BOTTOM BAND (Fig. 3).
The length of the bits is 60 mm, be careful
not to scrape the plastic part.
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
touch the
Fixture list (Specification)
Issue Department：
Station :
1.00
2017/5/23
Date
:
L=60mm
NPSU-PPE
19(1/1)
Fig. 3
Qty.
Advertisement
