: Pyxis400 DISASS'Y SOP
Document No.
Take out SIDE BAND-R & unscrewing
Operation Name :
Glove Requirements: Half-finger gloves
SIDE BAND-R
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Electric Screwdriver (S-4000MS)
Bits Type: T15,φ=5mm,L=60mm
Tabulator:
Xin-Xin Chen
Standard Operation Procedure
Fig. 2
Qty.
1
1
Auditor : Ethan Lai
Ver. :
Steps:
1. Unscrew (× 4) all joints illustrated as Fig. 1.
Torsion: 4.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
2. Take out SIDE BAND-R (Fig. 2).
Follow the direction of the red arrow to take
out SIDE BAND-R carefully.
1
Screw
2
3
4
Fixture list (Specification)
Issue Department:
Station :
1.00
2017/5/23
Date
:
Fig. 1
NPSU-PPE
16(1/1)
Qty.