Table of Contents
Advertisement
Using This Reference
Using This Reference
This reference guide explains how to use CLI commands to control your
NetDefend firewall.
In the chapter CLI Commands on page 17, the CLI commands are divided into
groups, according to their purpose. The commands are presented in alphabetical
order within those groups.
Several CLI commands have CLI variables as their parameters. These CLI
variables function as sub-commands and may have multiple fields.
This guide presents CLI variables in a separate chapter, CLI Variables on page
115. Like CLI commands, the CLI variables appear in alphabetical order. However,
the variables are not divided into groups, because a single variable may be used by
more than one group of commands.
The following information is provided for each CLI command or variable:
Purpose
Effect
Syntax
Parameters
Fields
2
Describes the command or variable's purpose and provides
background information
Describes the effect of running the command. Relevant for
Appliance Operation commands only.
The format of the command
Describes the command's parameters, if there are any.
Relevant for commands only.
Describes the variable's fields, if there are any. Relevant for
variables only.
D-Link NetDefend CLI Reference Guide
Advertisement
Table of Contents
