Dhcp Scopes - D-Link NetDefend DFL-CP310 Cli Reference Manual

dhcp scopes

P
URPOSE
The

dhcp scopes

Configuration Protocol) scopes in the following ways:
• Adding a DHCP scope for a settings for an internal network
• Modifying an internal network's DHCP scope
• Deleting an internal network's DHCP scope
• Displaying and exporting DHCP scopes
• Clearing the DHCP Scopes table
An internal network's DHCP scope specifies a set of custom DHCP settings.
S
YNTAX
When used with
add
add dhcp scopes network network [domain domain] [dns dns] [dns1 dns1] [dns2
dns2] [wins wins] [wins1 wins1] [wins2 wins2] [ntp1 ntp1] [ntp2 ntp2] [callmgr1
callmgr1] [callmgr2 callmgr2] [tftpserver tftpserver] [tftpbootfile tftpbootfile]
When used with
set
set dhcp scopes number [network network] [domain domain] [dns dns] [dns1 dns1]
[dns2 dns2] [wins wins] [wins1 wins1] [wins2 wins2] [ntp1 ntp1] [ntp2 ntp2]
[callmgr1 callmgr1] [callmgr2 callmgr2] [tftpserver tftpserver] [tftpbootfile
tftpbootfile]
When used with
delete
delete dhcp scopes number
When used with
show
show dhcp scopes [number] [network | domain | dns dns | dns1 | dns2 | wins | wins1
| wins2 | ntp1 | ntp2 | callmgr1 | callmgr2 | tftpserver | tftpbootfile]
Chapter 5: CLI Variables
variable is used for working with DHCP (Dynamic Host
:
:
:
:
dhcp scopes
125