Table of Contents
Advertisement
net wlan
dhcpserver
222
String. Indicates whether the NetDefend DHCP server is
enabled. This can have the following values:
• enabled
- The NetDefend DHCP server is
enabled.
•
disabled
- The NetDefend DHCP server is
disabled.
• relay
- DHCP relay is enabled.
enabled
The default value is
By default, the NetDefend firewall operates as a DHCP
server. This allows the NetDefend firewall to automatically
configure all the devices on the WLAN network with their
network configuration details.
If you already have a DHCP server in the DMZ's internal
network, and you want to use it instead of the NetDefend
DHCP server, you must disable the NetDefend DHCP server,
since you cannot have two DHCP servers or relays on the
same network segment.
If you want to use a DHCP server on the Internet or via a
VPN, instead of the NetDefend DHCP server, you can
configure DHCP relay. When in DHCP relay mode, the
NetDefend firewall relays information from the desired DHCP
server to the devices on the WLAN network.
.
D-Link NetDefend CLI Reference Guide
Advertisement
Table of Contents
