Port Lan1 / Port Lan2 / Port Lan3 / Port Lan4 - D-Link NetDefend DFL-CP310 Cli Reference Manual

port lan1 / port lan2 / port lan3 / port lan4

P
URPOSE
The ,
port lan1
for working with the appliance's LAN1, LAN2, LAN3, and LAN4 ports,
respectively, in the following ways:
• Modifying the relevant LAN port's settings
• Displaying and exporting the relevant LAN port's settings
S
YNTAX
When used with
set
set port lan1 [network network] [hatrack hatrack] [link link]
set port lan2 [network network] [hatrack hatrack] [link link]
set port lan3 [network network] [hatrack hatrack] [link link]
set port lan4 [network network] [hatrack hatrack] [link link]
When used with
show
show port lan1 [network | hatrack | link]
show port lan2 [network | hatrack | link]
show port lan3 [network | hatrack | link]
show port lan4 [network | hatrack | link]
F
IELDS
network
Chapter 5: CLI Variables
,
port lan2 port lan3
:
:
String. The port's assignment. This can have the following
values:
•
lan
•
Any existing VLAN. For information on adding
VLANs, see vlan on page 350.
The default value is

port lan1 / port lan2 / port lan3 / port lan4

, and
port lan4
- The LAN network
lan .
variables are used
245