Table of Contents
Advertisement
dialup
P
URPOSE
The
variable is used for working with dialup modem settings in the
dialup
following ways:
• Setting up a dialup modem
• Displaying and exporting dialup modem settings
You can use a dialup modem as a primary or secondary Internet connection
method. This is useful in locations where broadband Internet access is unavailable.
When used as a backup Internet connection, the NetDefend firewall automatically
dials the modem if the primary Internet connection fails. The modem can be
automatically disconnected when not in use.
Note: Before setting up the dialup modem, you must connect it to your NetDefend
firewall's serial port. You can use either a regular or ISDN dialup modem.
Note: After you have finished setting up the modem, you must configure a Dialup
Internet connection.
If you want to use the dialup connection as a backup connection, you must configure
a LAN or broadband connection as the primary Internet connection, and configure the
Dialup connection as the secondary Internet connection. Refer to the User Guide and
to net wan2 on page 214.
S
YNTAX
When used with
set
set dialup [type type] [speed speed] [dialmode dialmode] [custominit custominit]
When used with
show
set dialup [type | speed | dialmode | custominit]
Chapter 5: CLI Variables
:
:
dialup
131
Advertisement
Table of Contents
