Table of Contents
Advertisement
smartdefense network-security ip-icmp cisco-ios
log
num-hops
proto-103
proto-53
306
String. Indicates whether to log Cisco IOS DOS attacks. This
can have the following values:
•
enabled
- Log Cisco IOS DOS attacks.
•
disabled
- Do not log Cisco IOS DOS
attacks.
enabled
The default value is
Integer. The number of hops from the enforcement module
that Cisco routers should be protected.
The default value is 10.
String. Indicates whether to enable dropping IPv4 packets of
the PIM - Protocol 103 type. This can have the following
values:
•
enabled
- Packet dropping is enabled for this
protocol type.
•
disabled
- Packet dropping is disabled for
this protocol type.
enabled
The default value is
String. Indicates whether to enable dropping IPv4 packets of
the SWIPE - Protocol 53 type. This can have the following
values:
•
enabled
- Packet dropping is enabled for this
protocol type.
•
disabled
- Packet dropping is disabled for
this protocol type.
enabled
The default value is
.
.
.
D-Link NetDefend CLI Reference Guide
Advertisement
Table of Contents
