Table of Contents
Advertisement
F
IELDS
mode
bypassfw
E
1
XAMPLE
The following command enables the internal VPN Server and specifies that
authenticated users should be allowed to bypass NAT, but not the firewall:
set vpn internalserver mode enabled bypassfw disabled
E
2
XAMPLE
The following command displays the internal VPN Server Bypass Firewall
settings:
show vpn internalserver bypassfw
Chapter 5: CLI Variables
String. The internal VPN Server mode. This can have the
following values:
•
enabled
- The NetDefend internal VPN Server
is enabled.
•
disabled
- The NetDefend internal VPN
Server is disabled.
disabled
The default value is
Note: Disabling the internal VPN Server will cause all existing
VPN tunnels from your internal networks to disconnect.
String. Indicates whether to allow authenticated users to
bypass the firewall and access your internal network without
restriction. This can have the following values:
•
enabled
- Authenticated users connecting
from internal networks can bypass the firewall.
•
disabled
- Authenticated users connecting
from internal networks cannot bypass the firewall.
disabled
The default value is
vpn internalserver
.
.
365
Advertisement
Table of Contents
