Table of Contents
Advertisement
F
IELDS
mode
iprange
Chapter 5: CLI Variables
String. Indicates from where SSH access to the NetDefend
Portal should be granted. This can have the following values:
•
internal
- The internal network only.
This disables remote SSH capability.
•
range
- A particular range of IP addresses.
If you choose this mode, you must include the
iprange
field.
•
any
- Any IP address.
•
vpn
- The internal network and your VPN.
internal
The default value is
Warning: If remote SSH is enabled, your NetDefend firewall
settings can be changed remotely, so it is especially important
to make sure all NetDefend firewall users' passwords are
difficult to guess.
IP Address or String. The desired IP address range. This can
have the following values:
•
An IP address
•
An IP address range. To specify a range, use the
following format:
<Start IP Address>-<End IP
Address>
•
undefined
- No IP address range is defined.
undefined
The default value is
.
.
ssh
339
Advertisement
Table of Contents
