Table of Contents
Advertisement
dest
ports
Chapter 5: CLI Variables
IP Address or String. Select the destination of the connections
you want to allow or block. This can have the following values:
•
An IP address
•
An IP address range - To specify a range, use the
following format:
<Start IP Address>-<End IP
Address>
• any
- The rule should apply to any destination.
• wan
• lan
• dmz
• officemode
• vpn
•
notvpn
- Not VPN
•
The name of a VPN site
•
The name of a network object
any
The default value is
Integer. The ports to which the rule applies. This can have the
following values:
•
A port number - The rule will apply to this port only.
•
A port range - To specify a range, use the following
format:
<Start Port Number>-<End Port
Number>
Note: If you do not enter a port or port range, the rule will apply
to all ports.
.
fw rules
141
Advertisement
Table of Contents
