Table of Contents
Advertisement
net lan
P
URPOSE
The
variable is used for working with your Local Area Network (LAN)
net lan
settings in the following ways:
• Configuring your NetDefend firewall's LAN settings, including:
• Hide Network Address Translation (NAT)
• Your NetDefend firewall's internal IP address
• The range of IP addresses in your internal network
• DHCP settings
• Secure HotSpot access
• Displaying and exporting the above LAN settings
• Displaying and exporting all LAN settings, including High Availability
settings and OSPF settings.
For information on configuring, displaying, and exporting specific LAN High
Availability settings, see net lan ha on page 187. For information on
configuring, displaying, and exporting specific LAN OSPF settings, see net lan
ospf on page 188 and net lan ospf md5 on page 189.
Note: The DHCP server only serves computers that are configured to obtain an IP
address automatically. If a computer is not configured to obtain an IP address
automatically, it is recommended to assign it an IP address outside of the DHCP
address range. If you do assign it an IP address within the DHCP address range, the
DHCP server will not assign this IP address to another computer.
Chapter 5: CLI Variables
net lan
181
Advertisement
Table of Contents
