Dhcp Settings - D-Link DFL-600 Manual

DHCP Settings

DHCP (Dynamic Host Configuration Protocol) is a method of automatically
assigning IP addresses, subnet masks, default gateway and DNS server IP
address to computers on the LAN side of the DFL-600. The DFL-600 can be
a DHCP server for your LAN, assigning IP addresses, etc. to computers on
your network from a range of addresses you specify below.
DHCP Server Status
Starting IP Address
This allows you to Enable or Disable the DHCP
Server feature on the DFL-600. The default is
Enabled.
This is the first IP address in a range that the
DFL-600 will assign to a computer on your
network. This IP address can not be the same as
the IP address assigned to the DFL-600, nor can
the IP address assigned to the DFL-600 be
contained in the range of IP addresses available
for the DFL-600 to assign. In this case, the IP
address of the DFL-600 is 192.168.0.1, so the
first IP address in the range is 192.168.0.2.
28