Lexmark XM9100 Series User Manual page 260

Clearing jams
3
Slide the finisher back into place.
4
Open door C, and then remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
Notes:
•
Make sure that door C does not hit any cable attached to the printer.
•
Make sure that all paper fragments are removed.
•
If the 3000‑sheet tray is installed, then slide the tray to the right to open the door.
5
Close door C.
260