Lexmark XM9100 Series User Manual page 113

Scanning
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Navigate to:
Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup
3
Enter the appropriate information.
Note: A password may be required. If you do not have an ID and password, then contact your system support
person.
4
Enter a shortcut number.
Note: If you enter a number that is already in use, then you are prompted to select another number.
5
Click Add.
Creating an FTP shortcut using the printer control panel
1
From the home screen, navigate to:
FTP > FTP > type the FTP address >
2
Verify that the shortcut name and number are correct, and then touch OK.
Notes:
•
If the name or number is incorrect, then touch Cancel, and then reenter the information.
• If you enter a number that is already in use, then you are prompted to select another number.
Scanning to an FTP address
Scanning to an FTP address using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
FTP > FTP > type the FTP address > Done > Send It
Notes:
• You can also enter the recipient using the shortcut number or address book.
•
To add recipients, touch Next Number.
> type a name for the shortcut > Done
113