Lexmark XM9100 Series User Manual page 184

Understanding the printer menus
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Blank Pages
Do Not Print
Print
Print Settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Specify whether blank separator sheets are inserted.
Notes:
• Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
(1,2,3) (1,2,3). If Collate is set to (1,1,1) (2,2,2), then a blank page is inserted between each
set of printed pages, such as after all page 1's and after all page 2's.
•
Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job. This setting is
useful when printing transparencies or when inserting blank pages in a document .
Specify the paper source for the separator sheet.
Note: Tray 1 is the factory default setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
To
Set the default printer language.
Notes:
•
PCL Emulation is the factory default setting.
•
PostScript emulation uses a PostScript interpreter for
processing print jobs.
•
PCL Emulation uses a PCL interpreter for processing print
jobs.
•
Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
Determine if print jobs are removed from the print queue when
they require unavailable printer options or custom settings. These
print jobs are stored in a separate print queue, so other jobs print
normally. When the missing information or options, or both are
obtained, the stored jobs print.
Notes:
• Off is the factory default setting.
•
This menu appears only if a non-read‑only printer hard disk
is installed. This requirement ensures that stored jobs are
not deleted if the printer loses power.
184