Uploading A Vt Pro-E Project - Crestron Isys TPS-4500 Operation Manual

Crestron TPS-4500 & TPS-4500L
The TPS-4500/L touchpanel
source file has the extension
.vtp. A compiled VT Pro-e file
has the extension .vtz.
Operations Guide - DOC. 5891A
"Send Program" Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information or press F7. This should
display a window that provides details about the current program loaded
into the control system.

Uploading a VT Pro-e Project

The VT Pro-e file can be uploaded to the touchpanel using VT Pro-e or via the
Crestron Viewport.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the "Open" window, navigate to the VT
Pro-e file (.vtp), and click Open.
3. Select File | Upload Project. This automatically selects the compiled .vtz
file.
Upload via Crestron Viewport
1. Verify that the procedure for "Communication Settings" that begins on page
32 has been performed.
2. As shown after this step, select File Transfer | Send Touchpanel
(alternatively, press Alt+T) from the Viewport menu.
File Transfer | Send Touchpanel Command
12 Inch Tilt/Lectern Touchpanels: TPS-4500 & TPS-4500L • 35
12 Inch Tilt/Lectern Touchpanels