Table of Contents
Advertisement
Crestron TPS-4500 & TPS-4500L
Operations Guide - DOC. 5891A
Video Card Expansion Slot
The TPS-4500L has a dedicated expansion slot for the optional TPS-VIDL-1 or TPS-
VIDL-2 video digitizer card while the TPS-4500 has a dedicated expansion slot for
the optional TPS-VID-1 or TPS-VID-2 video digitizer card. These cards allow
NTSC/PAL composite and S-video signals to be displayed in a window on the
touchpanel or full screen. The TPS-VID-2 and the TPS-VIDL-2 add the capability of
displaying two composite video sources.
For more information refer to the latest revision of the TPS-VIDL-1 /
TPS-VIDL-2 Video Card Operations & Installation Guide (Doc. 6070) or the
TPS-VID-1 / TPS-VID-2 Video Card Operations & Installation Guide (Doc. 6059).
Both are available for download from the Downloads | Product Manuals section of
the Crestron website (www.crestron.com).
Memory
The TPS-4500/L ships with 4MB of flash and 8MB of DRAM memory. Additional
memory by Crestron can be purchased separately and installed in the field. Refer to
the latest revision of the Flash Memory for TPS User Interfaces Installation Guide
(Doc. 5927) for an installation procedure.
Interface Modules (TPS-4500 only)
Connect the TPS-4500 to an outboard interface module, which provides expanded
network/video connections for the touchpanel system. The connecting cable
assemblies are supplied. There are two interface modules available: TPS-4500IMPC
and TPS-4500IMW.
The TPS-4500IMPC is supplied with every TPS-4500. This module is housed in a
black enclosure with a silk-screened top panel and several I/O ports. At the shorter
sides of the unit, the enclosure extends to form feet at a right angle to the side. These
feet have mounting holes. Consult the latest revision of the
TPS-4500IMPC Operations Guide (Doc. 6163) for more details.
The TPS-4500IMW is not provided with the TPS-4500; it must be purchased
separately. This unit installs into a one-gang electrical box (2.5-inch depth
minimum). A decorator style wallplate can be mounted over the unit once it is
installed to offer a more eye-pleasing appearance compared to the TPS-4500IMPC.
Consult the latest revision of the TPS-4500IMW Operations Guide (Doc. 5913) for
more details.
Position Lock Buttons (TPS-4500 only)
These buttons are used to make angular adjustments to the touchpanel screen. Each
incremental angular position is indicated by an audible click (unless the position lock
button is held down). Two position lock buttons are located on the backside of the
touchscreen, shown after this paragraph. The two buttons function together so that if
one is held down, the other is held down as well. This makes tilting the touchpanel
comfortable for left and right-hand users. Furthermore, the button's position allows
for one-hand tilting.
12 Inch Tilt/Lectern Touchpanels: TPS-4500 & TPS-4500L • 7
12 Inch Tilt/Lectern Touchpanels
Advertisement
Table of Contents
