Uploading A Vt Pro-E Project - Crestron ST-1700C Operation Manual

Crestron ST-1700C
A compiled VT Pro-e file has
the extension .vtz.
Operations Guide – DOC. 6225A

Uploading a VT Pro-e Project

VT Pro-e is a Windows compatible software package for creating Crestron touchpanel
screen designs. Refer to "Programming with VT Pro-e" on page 15 for additional
details. To upload a VT Pro-e project to the ST-1700C, complete the following steps.
1. Make sure that "Communication Settings" that begins on page 23 has
been performed.
2. As shown below, select File Transfer | Send Touchpanel
(alternatively, depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the ST-1700C and then click
OK. The "Touch Panel Transfer" window appears.
"Select Network ID" Window
"Touch Panel Transfer" Window
4. Click Browse. The "Open" window appears as shown on the next page.
5. Select the VT Pro-e (vtz) file and click Open. The transfer will
complete automatically.
1-Way Wireless RF Touchpanel
1-Way Wireless RF Touchpanel: ST-1700C • 27