Firmware Upgrade - Crestron ST-1700C Operation Manual

1-Way Wireless RF Touchpanel
A firmware upgrade file has the
extension .csf.
28 • 1-Way Wireless RF Touchpanel: ST-1700C
Select VTZ File
6. Disconnect the programming cable and the external power pack from
the touchpanel.
7. Close the Viewport, exit VT Pro-e, and disconnect the programming
cable from the PC and the control system.

Firmware Upgrade

Firmware upgrade files can be downloaded from the updates section of the Crestron
website (http://www.crestron.com/updates. To upgrade the ST-1700C firmware,
complete the following steps.
1. Make sure that "Communication Settings" that begins on page 23 has
been performed.
2. As shown below, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
Select Update Touchpanel Firmware
3. As shown on the next page, select the Net ID of the ST-1700C and then
click OK.
Crestron ST-1700C
Operations Guide – DOC. 6225A