Firmware Upgrade - Crestron Isys TPS-6000 Operation Manual

Crestron Isys™ TPS-6000
A firmware upgrade file has the
extension .csf.
Operations Guide - DOC. 5864A
"Touch Panel Transfer" Window
Additional choices include Do not send graphic files and Do not send sound files.
These are often very large files that take a long time to load.
4. Click Browse. The "Open" window appears as shown in the following
illustration.
"Open" Window
5. Select the VT Pro-e (.vtz) file and click Open. The transfer will complete
automatically.

Firmware Upgrade

To take advantage of all the TPS-6000 features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website
(http://www.crestron.com/downloads/software_updates.asp) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
NOTE: The following is the acceptable file extension for a firmware update file:
.csf TPS.V.XXXXX.csf (panel firmware)
15 Inch Tilt Touchpanel: Crestron Isys™ TPS-6000 • 43
15 Inch Tilt Touchpanel
Each time a project is selected using
the Browse command, that project is
added to the File Name drop-down
list. This makes it convenient to
recall projects without need to
browse to a directory. To delete the
list click Clear History.
All Files in Project: sends the entire
project.
Only Changed Files: sends only the
files that are different from those that
are currently stored in the panel.
Note that if any pages in the panel
are not present in the project, those
pages will be deleted from the panel.