HP ProLiant DL145 Maintenance And Service Manual page 68

Diagnostic Tools
2. Type a new password in the password box.
The password may consist of up to eight alphanumeric characters (A-Z, a-z, 0-9).
3. Retype the password to verify the first entry, then press Enter.
4. Press F10 to save the password and close the Setup Utility.
After setting the password, Setup automatically sets the selected password field to
Enabled.
To change a system password:
1. In the Security menu screen, select a set password field—Set User Password or Set
Supervisor Password, then press Enter.
Figure 3-4: Setup window for changing a system password
2. Type the original password in the password box.
3. Type a new password then press Enter.
4. Retype the new password to verify the first entry then press Enter again.
5. Press F10 to save the password and close the Setup Utility.
To remove a system password:
1. In the Security menu screen, select a set password field—Set User Password or Set
Supervisor Password, then press Enter.
2. Type the original password then press Enter.
3. Press Enter twice without entering anything in the new and confirm password fields.
4. Press F10 to save the changes you made and close the Setup Utility.
Setup automatically sets the selected password field to Clear.
3-10
All manuals and user guides at all-guides.com
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide