Figure 2-29: SCSI cable routing for standard height/full-length
controller boards phase 4
3. Perform the post-installation procedures described on page 2-6.
4. Set up the SCSI configuration.
Refer to the documentation that came with the SCSI controller board for detailed
procedures.
Configuring a SATA Hard Drive:
Configuring a SATA hard drive is a two-step process that includes:
1. Install the SATA hard drive.
2. Set up the SATA configuration.
For detailed procedures, refer to the Server Support CD or to the operating system
documentation.
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
All manuals and user guides at all-guides.com
Removal and Replacement Procedures
2-25