Hardware Configuration Warnings; Symbols On Equipment - HP ProLiant DL145 Maintenance And Service Manual

Removal and Replacement Procedures

Hardware Configuration Warnings

Read the following sections before performing any servicing or troubleshooting procedure.

Symbols on Equipment

These symbols may be located on equipment in areas where hazardous conditions may exist.
2-2
All manuals and user guides at all-guides.com
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. Because of the complexity of the individual boards and subassemblies, no
one should attempt to make repairs at the component level or to make modifications to
any printed wiring board. Improper repairs can create a safety hazard.
CAUTION: Whenever installing hardware or performing maintenance procedures requiring
access to internal components, it is recommended that all server data be backed up to avoid
loss.
WARNING: This symbol, in conjunction with any of the following symbols, indicates
the presence of a potential hazard. The potential for injury exists if warnings are not
observed. Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to cool
before touching.
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide