HP ProLiant DL145 Maintenance And Service Manual page 25

Figure 2-12: Removing the hard drive from the chassis
4. Remove the hard drive from its carrier:
a. Remove the four mounting screws that secure the hard drive to the carrier.
b. Remove the hard drive from its carrier.
Figure 2-13: Removing the hard drive from its carrier
IMPORTANT: If you removed a hard drive without plans of installing a new one, you must reinstall
the mounting screws at their pre-installed location for future use, then reinstall the HDD carrier in
the chassis for the proper cooling of the system.
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
All manuals and user guides at all-guides.com
Removal and Replacement Procedures
2-15