HP ProLiant DL145 Maintenance And Service Manual page 29

In Figure 2-20, the plane section of the PCI riser board assembly is dimmed out for clarity.
Figure 2-20: Installing the SCSI controller board in the standard height/full-length
expansion slot
Proceed to the next section for instructions on how to route the SCSI drive cables.
To route the SCSI drive cables:
Cable routing for SCSI hard drive varies depending on which expansion slot you installed the
SCSI controller board—in the low–profile slot or in the standard height/full-length slot, and
to a certain extent, to the location of the cable connectors on the SCSI controller board you
installed.
Figure 2-21: SCSI cable parts
Item
1
2
3
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
All manuals and user guides at all-guides.com
Description
Connector end
240 mm location
Terminator end
Removal and Replacement Procedures
2-19