HP ProLiant DL145 Maintenance And Service Manual page 58

Removal and Replacement Procedures
c. Insert the two PSU mounting screws located in the rear panel.
d. Reconnect the processor power cable, the system board power cable, and the PSU I
Figure 2-54: Installing a PSU
4. Perform the post-installation procedures described on page 2-6.
2-48
All manuals and user guides at all-guides.com
cable to their respective system board connectors, then reconnect the power cables of
all installed drives to the PSU.
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
2
C