Using This Manual - Teledyne 100E Instruction Manual

M100E Documentation Model 100E Instruction Manual

1.1. Using This Manual

This manual has the following data structures:
1.0 Table of Contents:
Outlines the contents of the manual in the order the information is presented. This is a
good overview of the topics covered in the manual. There is also a list of tables, a list of
figures and a list of appendices. In the electronic version of the manual, clicking on any
of these table entries automatically views that section.
2.0 Specifications and Warranty
This section contains a list of the analyzer's performance specifications, a description of
the conditions and configuration under which EPA equivalency was approved and T-API's
warranty statement.
3.0 Getting Started:
A concise set of instructions for setting up, installing and running your analyzer for the
first time.
4.0 FAQ:
Answers to the most frequently asked questions about operating the analyzer.
5.0 Optional Hardware & Software
A description of optional equipment to add functionality to your analyzer.
6.0 Operation Instructions
This section includes step by step instructions for operating the analyzer and using its
various features and functions.
7.0 Calibration Procedures
General information and step by step instructions for calibrating your analyzer.
8.0 EPA Protocol Calibration
Specific information regarding calibration requirements for analyzers used in EPA-
regulated monitoring applications.
9.0 Instrument Maintenance
Description of certain preventative maintenance procedures that should be regularly
performed on you instrument to keep it in good operating condition. This section also
includes information on using the iDAS to record diagnostic functions useful in predicting
possible component failures before they happen.
16 045150102 Rev XB1