Rab Warning Indicator; Handling Of The Sonar Sensors - Subaru WRX 2021 Owner's Manual

& RAB warning indicator
1) RAB malfunction message
2)

RAB warning indicator

If the Reverse Automatic Braking (RAB)
system malfunctions, the above indicator
illuminates on the combination meter.
Contact the nearest SUBARU dealer for
details.
Starting and operating/Reverse Automatic Braking (RAB) system
& Handling of the sonar sen-
sors
The 4 sonar sensors are located in the rear
bumper. To ensure the proper operation of
the Reverse Automatic Braking (RAB)
system, observe the following precau-
tions.
. Do not affix any stickers or other items
on the sonar sensors or the bumper
surface near the sonar sensors.
. Always keep the sonar sensors and the
rear bumper surface near the sonar
sensors clean.
. Do not modify the rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply strong impacts to the rear
bumper near the sonar sensors. If a sensor
becomes misaligned, a system malfunc-
tion may occur, including inability to detect
objects in the reversing direction. If any
strong impact is applied to the rear
bumper, contact a SUBARU dealer to
have the system inspected.
. Do not disassemble the sonar sensors.
NOTE
If the sonar sensors require repair or
replacement, or if the area of the rear
bumper near the sonar sensors re-
quires repair, paintwork or replace-
ment, contact your SUBARU dealer for
assistance.
7-75