Guiding Line; Handling Of Camera - Subaru WRX 2021 Owner's Manual

& Guiding line
1)

Guiding line

2) Warning message
The guiding line that indicates the width
and the front end of your vehicle is
displayed on the display.
& Handling of camera
CAUTION
Observe the following instructions.
Otherwise, the system may malfunc-
tion.
. Do not apply any strong impact to
the camera such as banging it or
hitting it with an object. The
mounting angle may change.
. The camera unit is a waterproof
structure. Do not attempt to re-
move, disassemble or modify the
unit.
. Do not rub strongly or polish the
camera lens with a hard brush or
abrasive compounds. The lens
may be scratched resulting in an
adverse effect to the camera
image.
. The camera lens is made of glass
or plastic. Do not allow any
organic solvent, body wax, oil
film remover or glass coating
agent to become attached on the
lens surface. If any becomes
attached, remove it immediately.
. Do not expose the camera lens to
any sudden temperature change,
for example, spraying hot water
Interior equipment/Front View Monitor
on it in cold weather.
. Do not apply the water jet of a
high pressure washer to the cam-
era or the surrounding area when
cleaning the vehicle. The impact
by the strong water pressure may
cause the camera to come off.
Also, water may enter inside the
camera and cause a malfunction.
. If the camera is exposed to any
impact, it may lead to malfunction
of the camera. Have the camera
inspected by your SUBARU deal-
er as soon as possible.
. Do not use a steam cleaner under
any circumstances. Some types
of steam cleaners inject hot
steam.
. The camera surface may be da-
maged by a flying stone.
NOTE
If the camera lens is contaminated, no
sharp image is available. When the
camera is contaminated with water
drops, snow or mud, wash it with water
and wipe away any moisture with a soft
cloth. If it heavily gets dirty, wash it with
a neutral detergent.
6-17