To Turn On/Off The Auto Vehicle Hold Function; To Operate The Auto Vehicle Hold Function - Subaru WRX 2021 Owner's Manual

NOTE
We recommend turning on the Auto
Vehicle Hold function when stopping
on an incline. If the Auto Vehicle Hold
function is turned off, the vehicle may
roll backward when driving off.
& To turn on/off the Auto Vehi-
cle Hold function
Auto Vehicle Hold switch
Starting and operating/Auto Vehicle Hold function (models with electronic parking brake system)
Auto Vehicle Hold ON indicator light
To turn on:
Press the Auto Vehicle Hold switch when
the Auto Vehicle Hold ON indicator light is
OFF. Then the Auto Vehicle Hold ON
indicator light will illuminate.
Even after turning on the Auto Vehicle
Hold function, it will automatically turn off
once the ignition switch is turned to the
"LOCK"/"OFF" position. The function will
remain turned off when the ignition switch
is turned back to the "ON" position.
To turn off:
Press the Auto Vehicle Hold switch when
the Auto Vehicle Hold ON indicator light
illuminates. Then the Auto Vehicle Hold
ON indicator light will turn off.
NOTE
. If you press and hold the Auto
Vehicle Hold switch for more than 30
seconds, the Auto Vehicle Hold ON
indicator light will turn off, and the
system will ignore any further pressing
of the switch. To activate the switch
again, restart the engine.
. When the Auto Vehicle Hold function
is deactivated while the Auto Vehicle
Hold function has a malfunction, if you
press the Auto Vehicle Hold switch, a
chirp will sound
& To operate the Auto Vehicle
Hold function
Stop the vehicle by depressing the brake
pedal when all of the following conditions
are met. Then the Auto Vehicle Hold
function will operate.
. The driver's door is closed.
. The driver's seatbelt is fastened.
. The select lever is in a position other
than the "P" position.
– CONTINUED –
7-47