Subaru WRX 2021 Owner's Manual page 202

3-62
Instruments and controls/Multi-function display (color LCD)
! Interior light setting
The setting procedure is the same as
"Defogger setting" F3-61, but select the
"Interior Light" item in step 1.
! Auto light sensor setting (if
equipped)
The setting procedure is the same as
"Defogger setting" F3-61, but select the
"Auto Light Sensor" item in step 1.
! Keyless Access Settings (if
equipped)
1. Select "Keyless Access Settings" from
the 2nd menu in the setting screen. Refer
to "Setting screen" F3-52.
2. Select "Driver's Door Unlock".
3. Select the preferred setting by using
the control switches.
4. Select "Set" to exit settings. Select "Go
Back" to return to the previous screen
without applying the setting changes.
! Welcome lighting setting
You can change the setting for the period
of time in which the exterior remain on by
the welcome lighting function.
1. Select "Welcome Lighting" from the
2nd menu in the setting screen. Refer to
"Setting screen" F3-52.
2. Select "Leaving time set" to change the
setting when leaving the vehicle. Select
"Approaching time set" to change the
setting when approaching.
3. Select the preferred setting by using
the control switches.
4. Select "Set" to exit settings. Select "Go
Back" to return to the previous screen
without applying the setting changes.