Table of Contents
Advertisement
7-74
Starting and operating/Reverse Automatic Braking (RAB) system
bumper when the select lever is set
to the "R" position.
– The system detects sounds of a
similar frequency to the RAB sonar.
& Canceling the Reverse Auto-
matic Braking (RAB) system
operation
The Reverse Automatic Braking (RAB)
system can be temporarily cancelled by
any of the following operations.
. Depressing the brake pedal
. Depressing the accelerator pedal
. Depressing and holding the accelerator
pedal (in this case, limited acceleration will
be canceled and the vehicle will continue
reversing.)
. Shifting the select lever to a position
other than the "R" position
*: While the vehicle is stopped by the automatic
braking.
NOTE
The system will be cancelled if the
object is no longer detected.
& Reverse Automatic Braking
(RAB) system ON/OFF setting
While the select lever is shifted to the "R"
position, the below functions of the Re-
verse Automatic Braking (RAB) system
can be set by operating the multi-function
display (color LCD).
For details about how to operate the multi-
function display (color LCD), refer to
"Basic operation" F3-46.
*
*
1)
ON/OFF setting of Reverse Automatic
Braking (RAB)
2)
ON/OFF setting of the object detection
warning sound
When the Reverse Automatic Braking
(RAB) system is turned off, the RAB OFF
indicator will illuminate.
NOTE
The Reverse Automatic Braking (RAB)
system settings that are changed by
the multi-function display (color LCD)
will be restored to default (ON setting)
the next time the select lever is shifted
to "R" position.
Also, the following settings can be chan-
ged by operating the combination meter
display (color LCD).
. Warning volume
. Sonar audible alarm ON/OFF
For details, refer to "RAB (models with the
EyeSight system)" F3-43.
Advertisement
Chapters
Table of Contents
