Drive Switch - Subaru WRX 2021 Owner's Manual

7-30
Starting and operating/SI-DRIVE
& SI-DRIVE switch
NOTE
. The next time you turn on the engine,
the following SI-DRIVE mode will be
selected.
– Intelligent (I) mode if you have
turned off the engine in the Intelli-
gent (I) mode
– Sport (S) mode if you have turned
off the engine in the Sport (S) mode
or Sport Sharp (S#) mode
. If the CHECK ENGINE warning light/
malfunction indicator light illuminates
during engine operation, the SI-DRIVE
mode changes to the Sport (S) mode. In
this case, it is not possible to change to
the Sport Sharp (S#) mode or Intelligent
(I) mode.
. If the engine coolant temperature
becomes so high that the engine could
overheat, it is not possible to change to
the Sport Sharp (S#) mode. While the
vehicle is in the Sport Sharp (S#) mode,
it changes to the Sport (S) mode when
the engine coolant temperature in-
creases.
. If any of the SI-DRIVE indicators
blink, the SI-DRIVE system may be
malfunctioning. Contact your SUBARU
dealer.
! STI
SI-DRIVE switch
To select the Intelligent (I) mode:
Push the SI-DRIVE switch.
To select the Sport (S) mode:
Rotate the SI-DRIVE switch to the left.
To select the Sport Sharp (S#) mode:
Rotate the SI-DRIVE switch to the right.
After operating the SI-DRIVE switch, the
switch returns to its original position.
! Except STI
SI-DRIVE switches
To select the Intelligent (I) mode:
. Press the "S/I" switch when the Sport
(S) mode is selected.
. Press the "S#/I" switch when the Sport
Sharp (S#) mode is selected.
To select the Sport (S) mode:
Press the "S/I" switch when any mode
other than Sport (S) mode is selected.
To select the Sport Sharp (S#) mode:
Press the "S#/I" switch when any mode
other than Sport Sharp (S#) mode is
selected.