Remote Sensor Bypass - Clarion SR5000 Installation Manual

4.
5.
The LED will now report the last system shutdown by flashing for one minute in the below grouped
patterns; the LED will stop flashing when the ignition is turned on.
LED FLASHES
One
Two
Three
Four
Six
Seven
Eight

Remote Sensor Bypass

Remote Sensor Bypass allows the operator to select which inputs and sensors are active during a
particular arming cycle. For a full description of Remote Sensor Bypass operation for testing
purposes refer to the owner's manual.
Release the override switch.
Press and release the override switch.
SHUTDOWN MODE
System timed out
Over-rev shutdown
Low or no RPM
Remote Shutdown (or optional push-button)
(-) Shutdown (H3/3 GRAY) or (+) Shutdown (H3/4 BROWN)
(-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Wait-to-start timed out
35