Primary Harness (H1),Wire Connection Guide
Primary Harness (H1) Wiring Diagram
___
ORANGE
H1/1
___
___
___
___
___
___
___
___
H1/9
OPEN
___
___
___
Primary Harness Wire Descriptions
H1/1 ORANGE (-) Ground-When-Armed Output
This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon
as the system is disarmed. The orange wire is pre-wired to control the starter kill relay.
N N O O T T E E : : If using the H1/1 ORANGE wire to activate an add-on accesso-
ry such as window automation, pager or voice module a 1 Amp diode
must be installed to ensure proper operation. Insert the diode as shown in
the following diagram.
IMPORTANT! Never interrupt any wire other than the starter wire.
(-) 500 mA Armed Output
(+)/(-) Selectable Light Flash Output
(-) Remote Start Activation Input
(-) 200 mA Domelight Supervision Output
(-) Door Trigger Input, Zone 3
(-) Multiplexed Input, Zone 4
(+) Door Trigger Input, Zone 3
(-) Chassis Ground Input
(+) Constant Power Input
(-) 200 mA Channel 2 Output
No Wire
(+) Siren Output
7