Problems And Solutions Without Messages; Printer Trouble - Canon imageCLASS 2300 Printer Manual

Problems and Solutions Without Messages

Use the following procedures to solve problems that do not cause the printer to
display a message.
IMPORTANT
•
Refer to "Responding to Error Messages," on p. 4-8 when messages are displayed.
•
If symptoms not specified in this section occur, a problem persists even after following
these procedures, or the cause cannot be figured out at all, contact your service
representative.
4

Printer Trouble

Indicators off and display blank.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Printing does not start.
Cause 1
Remedy
Cause 2
Remedy
4-4

Problems and Solutions Without Messages

Power switch is not turned ON.
Check the power switch to ensure this machine is turned ON.
Power cord is not connected.
Check the power cord and be sure it is connected at both ends.
No power at the AC outlet.
Check the AC outlet. Consult an electrician or the local power company. If you
are using a power strip, ensure the power lead is connected at the source and
turned ON.
The printer is offline.
Press [OK] to bring the printer online. (See "About Online and Offline," on p. 2-
4.)
Output tray is full of paper during the print job.
Remove the paper in the tray.