Feeder Menu
About Feeder Menu
This menu is used to specify the paper size loaded in each of the paper sources
(drawers and stack bypass) and to select other paper feed options. See p. 3-19 for
additional details.
Operation Flow for Feeder Menu
Use the example procedure below to open the Feeder Menu and specify the option
you want to select.
1
Press [PRINT].
PRINT
The indicator of the key lights up.
2
Check the control panel to ensure that the Job indicator is off.
3
OK
Press [OK] to take the printer offline.
F1
4
Press [F1] (MENU) until <FEEDER MENU> appears on the
display.
Feeder Menu
3-17
3