Connecting To A 10Base-T Network - Canon imageCLASS 2300 Printer Manual

Connecting to a 10Base-T network

Connect the 10Base-T/100Base-TX port to the hub port using a Category 3 or
higher rated twisted-pair LAN cable for the 10Base-T network. If your computer is
not compatible with the 10Base-T network, you would also need a 10Base-T
network board.
1
1-8 Connecting to a Computer
10Base-T/100Base-TX
port
Computer with a
10Base-T port
10Base-T cable
10Base-T hub
Computer without a
10Base-T port
10Base-T
LAN board