Jam Recovery - Canon imageCLASS 2300 Printer Manual

JAM RECOVERY

3
AUTOCONT
DENSITY
3-22 Config Menu
ON, OFF*
This setting enables printing to resume automatically once a paper jam has been
removed.
OFF
The printer does not resume printing automatically after the paper jam has been
removed. You must start the printing manually again. You may want to use this
setting to conserve memory.
ON
The printer reserves enough memory to hold the data for the page that jams and
automatically reprints the page that jammed. With this setting, printing speed is
slightly slower. Use this setting if there is sufficient memory available.
ON*, OFF
AUTOCONT (automatic continue) determines how the printer reacts to errors. If
the printer is part of a network or remote spooling system, set AUTOCONT to 'on'.
ON
The printer displays a message, goes offline for about 10 seconds and then
automatically goes back online and resumes printing.
OFF
The printer displays a message, goes offline and waits for you to correct the
problem. Press [OK] to resume operation.
0 to 15; 7*
This setting refers to the relative darkness of print on the paper.
For a darker setting, select a higher number. A darker setting consumes more
toner.
For a lighter setting, select a lower number. A lighter setting consumes less toner.