Entering the Printer Mode
This section describes how to enter the printer mode.
When you enter the printer mode, the printer gets ready for printing after
automatically checking the status of the machine and any options installed.
2
1
2
PRINT
2-2
Entering the Printer Mode
Press the "I" side of the power switch located on the right side
of the machine, if the power of the machine is turned OFF.
The power is turned ON and the indicators and the LCD display on the control
panel are turned on.
Press [PRINT].
The indicator of the key lights up.
If there are no errors found, the ON LINE indicator lights up, and the printer is
ready to print.
The information shown on the LCD display is as follows:
IMPORTANT
If the printer does not operate normally or an error message is shown, see "Printer
Trouble," on p. 4-4.