Pump Overview; Drive Assembly And Control Panel; External Control; Motor Features - Pentair Pool Products CC50 Owner's Manual

The IntelliFlo VSF Variable Speed and Flow Pump
®
can be programmed to run at a speed or a constant
flow rate over set time intervals for maximum operating
efficiency and energy conservation for a variety of
inground pools.
• The pump can operate from 450 RPM to 3450 RPM
with four preset speeds of 750, 1500, 2350 and 3110
RPM, or the pump can be set to control its own speed
and maintain a constant flow rate.
• The pump can adapt to applications between 20 and
140 GPM. Simply program the pump to the desired
flow rate, and the pump will automatically adjust to
operating conditions to maintain that specific flow rate.
• Up to 8 customizable programs that can be set for
constant flow or speed in either Manual, Egg Timer
or Schedule modes.
• Pump control panel alarm LED and error messages
warn the user of improper operation.
• Programmable priming mode with automatic detection
of prime for easy start-up and automatic detection of
loss of prime.
• Compatible with most cleaning systems, filters, and
jet action spas.
• UL/CUL/NSF

Drive Assembly and Control Panel

The IntelliFlo VSF pump drive is designed to produce
maximum motor operational efficiency. The drive controls
the motor's rotational speed by controlling the frequency
of the supplied current. It also protects the motor and
pump from operating outside of their intended operating
parameters.
The control panel can be mounted on the pump in four
different directions in order to provide the user the best
access. The control panel can also be mounted in a more
convenient location with the help of the keypad relocation
kit (P/N 356904Z).
Operator Control Panel Cover
Buttons and LED (Beneath)
Strain Relief Port
for Incoming AC Power
Motor Stand
Variable Speed and Flow Drive Assembly
INTELLIFLO

External Control

Most Pentair automation systems and IntelliComm
Communication Centers can remotely control the
IntelliFlo VSF pump. The pump's communications
address and other functions are accessible from the
pump's control panel.
• RS-485 communication cable included
• IntelliComm systems control one IntelliFlo pump using
the 4 External Control programs.
Refer to the automation system manual for further
details on how to connect and use the system with
your variable speed pump.

Motor Features

•
High Efficiency Permanent Magnet Synchronous
Motor (PMSM)
•
Superior speed control
•
Operates at lower temperatures due to high
efficiency
•
Designed to withstand outdoor environment
•
Totally Enclosed Fan Cooled (TEFC) Motor
•
56 Square Flange
•
Low noise

Drive Features

•
Active Power Factor Correction
•
UL 60730 Compliant
•
Rotatable Keypad
•
Easy Overhead Wiring
•
High Drive Operational Efficiency
•
Sensorless Flow and Pressure Control
Technology
•
Loss of Prime Detection
Communication port for connection
to automation systems or
communication centers via two-wire
RS-485 cable (not shown)
VSF Variable Speed and Flow Pump Installation and User's Guide
®

PUMP OVERVIEW

1
®