Pentair Pool Products CC50 Owner's Manual page 30

18
Set up a GloBrite
To setup an AUX circuit to control the GloBrite color light, assign the circuit light function
an auxiliary relay circuit (AUX 1), then assign the circuit name for that light circuit. The light
circuit name will appear on the main screen. Each GloBrite light must also be assigned a
circuit function.
To assign a Circuit Name for the GloBrite light, go to: MENU > SETUP > ADVANCED
> CIRCUIT FUNCTIONS
Setup a GloBrite light function circuit: Assign each light auxiliary relay circuit a
circuit name, then assign that light relay circuit in the "CIRCUIT FUNCTIONS" section,
as "INTELLIBRITE."
To setup the GloBrite light circuit function (use the "IntelliBrite" circuit name):
1. Press the button next to the AUX button (the relay auxiliary circuit
connected to the GloBrite (IntelliBrite) light).
2. Press the right or left side (PREV/NEXT) button next to "INTELLIBRITE."
Scroll through the circuit functions until "INTELLIBRITE" is displayed.
3. Press the SAVE button on the bottom of the screen. Press the EXIT button to
return to the main screen.
Assign the GloBrite light circuit to the Lights screen:
4. Press the Lights button on the bottom of the screen.
5. Press the right side button next to "CONFIGURE."
6. Press the button next to "NONE" to assign an IntelliBrite light circuit to the
selected button. Light names can be setup to display on the left side for
"Spa" features and on the right side for the "Pool" features.
7. Press the top left or right side button to scroll through the available light cir-
cuits which can be used for the GloBrite (IntelliBrite) lighting features. Select
at the circuit name you wish to use. The displayed circuit names are circuit
names that were previously assigned when assigning a circuit function.
Operating and Selecting GloBrite (IntelliBrite
From the "Modes" screen you can select various preset show color lighting effects,
such as "American mode" and "Sunset mode," and Pentair SAm
(an emulation of the SAm color scheme). Using the "Hold" and "Recall" feature you can
also capture and save a unique color effect to recall at a later time.
Modes screen
To access the IntelliBrite
screen, press the Lights button on the bottom of the screen, then press the left side
button next to "MODES."
Special Light Features: Up to twelve (12) IntelliBrite light circuits can be displayed on
the main Lights screen (special light features). From the Lights screen you can activate
the IntelliBrite lighting features (i.e., color swim, color set). Assuming each GloBrite
(IntelliBrite) light has its own relay and separate circuit.
®
Color Light Circuit Function
Color Light color show "Modes" features from the Lights
®
®
Color Light) Color Modes
Color Changing Light
®