P/N 0535974_R
REAR LOAD AND DOOR CASES INSTALLATION
REAR LOAD
SEALING CASE(S) IN FRONT OF
COOLER OPENING
Rear load cases are designed to be installed
in the cooler opening . A 1½ in . gap around
the outside of the cooler opening must be
maintained . Use the dimensions below to
build a sealed wall between the cooler opening
and the rear of the case(s) . Use silicone
around the perimeter of the frame to seal the
cases on the inside and outside of the cooler .
A frame must be built between the
cooler opening and the rear loading
area of the case(s). Seal the frame
with silicone. The area around the
rear access doors should be sealed to
the cooler wall. The seal should be air
and water tight.
Rear Access Doors
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Frame
Cooler Opening
Medium Temperature
1-21
Merchandisers