Ansi Z535.5 Definitions - Hussmann Freedom Series Installation & Operation Manual

Hide thumbs Also See for Freedom Series:

Installation & operation manual (110 pages)

Table Of Contents

Table of Contents

This manual was written in accordance with originally prescribed equipment that is

subject to change. Hussmann reserves the right to change or revise specifications

STOP

and product design in connection with any feature of our products.

ATTENTION

INSTALLER

PERSONAL PROTECTION EQUIPMENT (PPE)

Only qualified personnel should install and service this equipment. Servicing is

only to be done by factory authorized personnel. Personal Protection Equipment

(PPE) is required. Wear safety glasses, gloves, protective boots or shoes, long

NOTE

pants, and a long-sleeve shirt when working with this equipment and while handling

glass. Observe all precautions on tags, stickers, labels and literature attached to

this equipment. Component parts shall be replaced with like components. Service is to

be performed by factory authroized service personnel, so as to minimize the risk of

possible ignition due to incorrect parts or improper service. Contact your Hussmann

representative to arrange servicing.

The safety of our customers and employees

is paramount. The precautions and proce-

dures

described in this manual are intended

as general methods for safe use fo this

equipment. Please be sure to comply with

the precautions described in this manual to

protect you and others from possible harm.

The definitions at right are used to clarify

the magnitude and urgency of harm and

damage, considering problems arising

from misuse. Relative to their potential

danger, the definitions are divided into

four parts according to ANSI Z535

Series.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

WARNING

NOTICE

IMPORTANT

STOP

DANGER